Ford early Falcon, Mustang and Cortina twin outlet exhaust manifold. This model only fits engines fitted with a 2V Ford cylinder head, the AS0017-2V suits the 2V cylinder heads with removable intake manifolds only.
Made in Australia by Aussiespeed, the cast iron exhaust header suits the 2V heads. But don't worry AS0017-1V is also available for the integrated cylinder head powered vehicles. The cast iron exhaust manifold has both larger ports, larger cross section runners than the stock manifold. It is precisely machined and supplied with 2x steel flanges, 2x flange gaskets, 4x studs and 4x brass nuts.
The dual outlets are 40mm or just over 1.5 inches in diameter and the manifold is a 3 into one design. Yes we know it is an excellent starting point to build a turbo manifold for your early Ford.
The under side has reliefs to make fitting easier and doing up the bottom bolts. The manifold is taller and longer in the over all design and is perfect for standard and modified street engines. The manifold is 135mm from the head mounting flange to the outlet flanges.
Finished in high temp cast iron exhaust paint we recommend pre fitting before having them ceramic coated
The stock manifold and the Aussiespeed AS0017 are pictured together. Both manifolds were on the same flat surface and the pic shows the distance the 2 manifolds stick out from the head. Manifolds positioned side by side, the outlets can have the pipes made to fit just about any engine bay including early Falcon, Mustang and Econoline